Zeiss Photomicroscope DIC Inko questions.

Have questions about the equipment used for macro- or micro- photography? Post those questions in this forum.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

sebba28
Posts: 297
Joined: Thu Dec 29, 2011 11:13 pm
Location: Poland,Ireland

Zeiss Photomicroscope DIC Inko questions.

Post by sebba28 »

Hi
Is this dic condenser the correct one for Zeiss Photomicroscope?
zeiss inko condens.1.jpg

I also have a Zeiss DIC slider no.II

IMG_20210405_135638.jpg

I tried to set the DIC but it is not possible. Interferential bands do not match.The microscope is equipped with a fluorescent module and I wonder if dic works with this fluorescent module or should I remove it and use standard nose piece for objectives?
Any advice appreciated

Pau
Site Admin
Posts: 5439
Joined: Wed Jan 20, 2010 8:57 am
Location: Valencia, Spain

Re: Zeiss Photomicroscope DIC Inko questions.

Post by Pau »

- Yes, they are the right parts for DIC with the Zeiss PM and the adequate objectives (in principle only some Plan achromats and neofluars, although some others would work well enough)
- If your Florescence equipment increases the distance from the objective to the Inko (DIC) prism yes, it will need to be removed. The position of both Nomarski prisms respect to the objective back focal plane is critical for DIC
Pau

Post Reply Previous topicNext topic