Closed Loop Piezo Stage Operation.

Have questions about the equipment used for macro- or micro- photography? Post those questions in this forum.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

Smokedaddy
Posts: 1953
Joined: Sat Oct 07, 2006 10:16 am
Location: Bigfork, Montana
Contact:

Post by Smokedaddy »

I can't believe that someone hasn't designed some sort of two piece 'clamp' that slips over the lip of the male connector, covers the exposed wires, reduces down to snugly fit over the lead wire and snaps together. Sure would make it very difficult to accidentally pull any of the individual wires out.

mawyatt
Posts: 2497
Joined: Thu Aug 22, 2013 6:54 pm
Location: Clearwater, Florida

Post by mawyatt »

I'm sure there are better connectors available, but this what I have and use. Works Ok unless you abuse them and yank on the wires a lot like I've done :oops:

Best,
Research is like a treasure hunt, you don't know where to look or what you'll find!
~Mike

mawyatt
Posts: 2497
Joined: Thu Aug 22, 2013 6:54 pm
Location: Clearwater, Florida

Re: Closed Loop Piezo Stage Operation.

Post by mawyatt »

Had a few requests for details on these Piezo Controllers. PM for the schematics for the PI601 and PI603 closed loop controllers, the PI603 uses the PI amplifier module mentioned, the PI601 is stand alone requiring only a RPi interface.

Best,
Research is like a treasure hunt, you don't know where to look or what you'll find!
~Mike

Post Reply Previous topicNext topic