I picked up a 10X Mitutoyo Plan Apo Infinity-Corrected Long WD Objective.
I bought a 70-200mm f4 lens to mount it to.
What is the filter size on the Mitutoyo? I measured it and thought it was a 40.5mm, ordered a step down ring, but it doesn't fit. It is just a little too big, so I figured a 41mm but there doesn't seem to be anything out there this size.
Thanks!
What is the thread size on a Mitutoyo 10x?
Moderators: rjlittlefield, ChrisR, Chris S., Pau
-
- Posts: 130
- Joined: Thu Aug 10, 2006 4:52 pm
- Location: Ontario, Canada
- Contact:
What is the thread size on a Mitutoyo 10x?
Capturer of God's Creations.
There is a fine line between a hobby and mental illness.
There is a fine line between a hobby and mental illness.
- rjlittlefield
- Site Admin
- Posts: 23608
- Joined: Tue Aug 01, 2006 8:34 am
- Location: Richland, Washington State, USA
- Contact:
Sounds like you have a Mitutoyo BD.
http://www.photomacrography.net/forum/v ... hp?t=12483 says that it's M40 x 0.706 (36 tpi), and suggests some options for this hard-to-fit thread. See page 2 of the thread for the official Mitutoyo spec.
--Rik
http://www.photomacrography.net/forum/v ... hp?t=12483 says that it's M40 x 0.706 (36 tpi), and suggests some options for this hard-to-fit thread. See page 2 of the thread for the official Mitutoyo spec.
--Rik