Edit: also, I'm curious about where lothman sourced the circular coverslips, since I saw his reply in that thread using mosu black and was highly curious. I found another bunch of round coverslips in an old lab drawer :shock: , so I could offer/send/sell a set of some coverslips, a small amount of ...

I cannot comment on stacked lomo, but here is a testpic of the Lomo 3,7x what I sold to a forum member.

160mm extension sony A7R4, very good results even in the corners of full frame

0.05 mm per Revolution

looks fine so far, l like the large axial distance of the v-slot rollers, should make it stiff. For the spindle they state "Screw pitch: 2mm" what might be limiting for ultra fine steps <1µm. (For the price it is most probably not a ball screw spindle like in the THK KR rails but a trapezoidal threa...

To be fair, I would bet everyone here codes better than I do. I am not against DIY. Sorry in advance if it sounded like that, I feel like your tone was defensive which could be due to my poor wording. I prefer doing mechanical adaptations than having to code stuff with microcontrollers/Arduino etc....

Expensive, yes. However, they often show up for bargain prices. I use the Prior personally, I adapted it to fit my Wemacro when I need to run focus stacks and I use the original console when I simply need to operate the microscope for routine examination. I got mine for a bargain price. My advice i...

Thanks for the input. Yes I've seen this on commercial $$.$$$ products and hoped somebody has realised such a solution for a home-lab enviroment. Maybe someone is using a MACH CNC control software and adopted for focus bracketing. Any ideas are welcome

Hi all, in my bracketing rig I use components from MKJZZ which do a very good job, but there is still one thing what could be much improved. It is the control of the speed of the movement. In order to run slow you have to dive into menues and selects 1/2, 1/4, 1/8 steps and further settings in order...

The AstrHori has some bayonet ridges on the front but the company offers nothing to use them. I do not know if the Laowa ring would fit or not. 1ahrig03.jpg .... I assume the haters that populated the other thread here stopped reading this before they started. I tried this but since you teached me ...

Not sure if the lens I got from KEH is magical, just a mundane Nikkor 60 MM-D macro lens. I repeated again the comparison using Nikon Z6II FX camera with and without the PB-4 bellows, the results are the same. I cannot explain discordant results you are getting on your setup... Hi Iothman, Shot lym...

Thanks for the setup, but on theory the 60mm macro with floating elements should perform better at 1:1 when mounted via Nikon-F adapter to you camera.

You will achieve the same magnification mounted on the bellows, but do you achieve the same resolution?

FedEx is utter garbage. My parcel was stuck in Australia for over a month because the paperwork was not uploaded correctly by the driver. I'm afraid most of your problems are homemade. For my Nikon fine focus gears when having trouble it is with Australia.I no longer ship to Australia, they have th...

Macro_Cosmos wrote: ↑

Sun Mar 24, 2024 8:27 pm

Are they really better than the standard, easily available 3M/generic flocking adhesive?

for shure in regard of fibre emission since it is a foam and does not spread small fibres like the usual flocking material.

I just discovered this thread, so sad news. We lost a friend and a passionate photographer.

Robert I will miss you.

As someone who uses all three formats you mentioned, I would highly recommend buying at least two separate lens systems, one for MFT and one for FF+APS. The Olympus 60mm macro lens is excellent and ideal for slide copying, and then you don't need a bellows and you retain automation. This should sig...