Using UV filter with bellows
Moderators: rjlittlefield, ChrisR, Chris S., Pau
- dragonblade
- Posts: 200
- Joined: Sat Oct 18, 2014 11:16 pm
Using UV filter with bellows
Ive got a bellows with Canon FD mount from eBay which I haven't used yet. I also have a bunch of Canon FD lenses that I use with my Panasonic Micro 4/3 cameras with an M4/3 to Canon FD adapter. One worry I have is dust being blown on to the sensor from the bellows. I'm after some ideas on how I can use a UV filter or equivalent near the lens mount to prevent dust from passing through. I know there's a similar thread already on this very topic but my configuration is a little different in that I have an M4/3 to Canon FD adapter. Can't really think of a solution myself. I also have a Canon FD extension tube though I'm not sure if that would be helpful in inserting a UV filter.
- dragonblade
- Posts: 200
- Joined: Sat Oct 18, 2014 11:16 pm
Hmmm....don't suppose you can screw a filter directly on to an M42 screw lens mount? If so, one possible combination could be camera body – M4/3 to M42 adapter – filter – M42 to Canon FD adapter – bellows – Canon FD lens. Though I'm not keen on buying so many lens adapters as good quality ones tend to be fairly pricey.