Hi all,
I attached the Cognisys Stackshot to the fine drive of a microscope. I configured it to start from "100" and do 35 shots between the markings "100" and "10". However, when running the program there is a terrible offset. StackShot does not start at "100" but at approx "104" and finishes correctly at "10".
I also made a demonstration video that illustrates the problem:
https://youtu.be/MQ_0pX0j58A
So far, I was unable to disable the offset and make StackShot start at the desired point regardless of settings. I tried everything, different settings, different setups, different programs. Maybe someone in this forum can help me?
Thanks and best wishes
Terrible Cognisys StackShot offset, help needed to remove it
Moderators: rjlittlefield, ChrisR, Chris S., Pau