Using Wemacro 46C Clamps to hold Infinite Tube Lens

Have questions about the equipment used for macro- or micro- photography? Post those questions in this forum.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

Len Willan
Posts: 111
Joined: Sun Mar 22, 2009 9:52 pm
Location: Como West Sydney Australia
Contact:

Using Wemacro 46C Clamps to hold Infinite Tube Lens

Post by Len Willan »

Canon made a series of M39 Flocked extension tubes that were used with a Leitz mount
Image
A set made up for a tube lens that can use dioptres such as Raynox, Kenko, Sigma LSA, and other appropriate close up lenses.
[/img]Image

Using Wemacro 46C Clamps https://www.wemacro.com/?product=tube-clamp-46c
Image[/img]

Parts Top to Bottom
1) 46c Clamps
2) Infinite Tube Lens
3) QR 100mm Clamp drilled and tapped with two threaded ¼” holes 80mm apart
4) QR plate and Clamp bolted to Wemacro using ¼’ thread Capstan Screws
5) Bottom Leitz Aristophot dovetail clamp so complete Wemacro rail can be moved horizontally.
This combination works well,
See last picture here for Aristophot Rail base
http://www.photomacrography.net/forum/v ... highlight=
[/img]Image

Post Reply Previous topicNext topic