Canon made a series of M39 Flocked extension tubes that were used with a Leitz mount
A set made up for a tube lens that can use dioptres such as Raynox, Kenko, Sigma LSA, and other appropriate close up lenses.
[/img]
Using Wemacro 46C Clamps https://www.wemacro.com/?product=tube-clamp-46c
[/img]
Parts Top to Bottom
1) 46c Clamps
2) Infinite Tube Lens
3) QR 100mm Clamp drilled and tapped with two threaded ¼” holes 80mm apart
4) QR plate and Clamp bolted to Wemacro using ¼’ thread Capstan Screws
5) Bottom Leitz Aristophot dovetail clamp so complete Wemacro rail can be moved horizontally.
This combination works well,
See last picture here for Aristophot Rail base
http://www.photomacrography.net/forum/v ... highlight=
[/img]
Using Wemacro 46C Clamps to hold Infinite Tube Lens
Moderators: rjlittlefield, ChrisR, Chris S., Pau
-
- Posts: 111
- Joined: Sun Mar 22, 2009 9:52 pm
- Location: Como West Sydney Australia
- Contact: