This is a very small moth, about 4 or 5 mm total length.
Head may be about 1 mm or thereabout.
Equipment:
Homebrew linear movement with milling machine table.
10X plan achromat metallurgical objective. (Not infinity type)
Nikon D3100 and Fotidox rings to get correct distance to flange.
150 frames for front view and 160 for side view.
Approx 8 microns per step linear movement.
One flash with soft diffuser.
Affinity Photo software for processing Raw file to final image.
1 hour processing time for each stack.
Best regards,
Unni
A small moth
Moderators: rjlittlefield, ChrisR, Chris S., Pau