Hi I got a Canon Bellows, but one of the plastic prisms is broken, the other is already cracked. Are the replacement parts available?
Edit: found this thread but can't see the pics
http://www.photomacrography.net/forum/v ... ows+repair
Canon Bellows plastic prisms broken - replacement?
Moderators: rjlittlefield, ChrisR, Chris S., Pau
-
- Posts: 3439
- Joined: Sat Nov 20, 2010 10:40 am
- Location: Santa Clara, CA, USA
- Contact:
-
- Posts: 3439
- Joined: Sat Nov 20, 2010 10:40 am
- Location: Santa Clara, CA, USA
- Contact:
lothman...I have a replacement for the front standard bearing, but not for the rear standard. One option is to do what I did when my first CFD Bellows rear bearing broke...drill two holes through vertically and bolt the broken piece in place. Judging from your photos, it should be the unbroken side of the bearing that has the tightness adjustment screws, so you can bolt the broken side in place with no penalty. You might be able to bolt it to the sides of the standard as well.
Another option is to use a focuser bearing as a donor for the rear standard bearing. I have not done this, but the design looks similar, only twice as long. I have an extra focuser bearing as well.
Anyway, you have a couple options.
PM me with your address and I can send to you.
Another option is to use a focuser bearing as a donor for the rear standard bearing. I have not done this, but the design looks similar, only twice as long. I have an extra focuser bearing as well.
Anyway, you have a couple options.
PM me with your address and I can send to you.