Help Identifying Camera

dave4068 · Post by **dave4068** » Sat Sep 30, 2017 3:29 pm

I purchased a used Jenco JC-311 stereo microscope with a camera mounted on it. Windows 10 recognizes the camera as "OPTEC300C" but cannot locate a driver for it. I have searched online and contacted Jenco and Optec for a driver with no luck. Can anyone offer any help? There are no markings or labels on it.

Cactusdave · Post by **Cactusdave** » Mon Oct 02, 2017 1:25 pm

There are some generic USB microscope camera drivers here, together with some information. http://www.oasisscientific.com/downloads.html Worth a try?

Alan Wood · Post by **Alan Wood** » Tue Oct 03, 2017 3:04 am

You could try the free MICAM software:

http://science4all.nl/?Microscopy_and_Photography

Alan Wood

dave4068 · Post by **dave4068** » Thu Oct 05, 2017 1:20 am

Thanks. Cactusdave and Alan Wood. Tried both and several other viewing programs. Still not working. The device manager shows no driver present.

Choronzon · Post by **Choronzon** » Thu Oct 05, 2017 9:50 am

Windows 10 doesn't play well with digitally unsigned drivers. Even if you were able to locate it online, 10 wouldn't allow it to connect most likely. Best use Win 7 64 bit pro.