Zerene Stacker

[kenntos]

I do not know what happened, in Zerene Stacker, when I try to do synthetic stereo, not rockin images any more(sorry for my English).Windows 10.ZS 1.04.

Thanks Georgios

[rjlittlefield]

Stereo is controlled only by the settings at Options > Preferences > Stereo/Rocking.

Be sure to put a checkmark on "Generate stereo pair or rocking sequence".

You can fill in the other fields any time, but until you put a checkmark on "Generate...", no stereo or rocking sequences will be generated.

Note that the checkmark does not "stick" if you exit from ZS and re-launch. You have to add the checkmark every time.

--Rik

[kenntos]

Stereo is controlled only by the settings at Options > Preferences > Stereo/Rocking.

Be sure to put a checkmark on "Generate stereo pair or rocking sequence".

You can fill in the other fields any time, but until you put a checkmark on "Generate...", no stereo or rocking sequences will be generated.

Note that the checkmark does not "stick" if you exit from ZS and re-launch. You have to add the checkmark every time.

--Rik

Iput a checkmark on "Generate stereo pair or rocking sequence".
Maybe something is missing in Windows 10?[/img]

[rjlittlefield]

I'll bet you are getting two images, both the same.

That is because you have specified the minimum and maximum shifts as the same value, 2,5%.

You probably meant the minimum to be -2,5% (minus, not plus).

--Rik

[kenntos]

Thank you so much, Rik, appreciated.


50 shots.Pmax, Zerene Stacker.



Georgios

[rjlittlefield]

Excellent, thanks.

--Rik

[Chris S.]

Perhaps we should move this thread to the "Macro and Micro Technique and Technical Discussions" section of the forum. (Although that excellent stereo pair is certainly worthy of the gallery section.)

--Chris S.

[rjlittlefield]

Yes, definitely. I did not notice that it was in the image gallery. Topic moved, original poster PM'd.

--Rik

[kenntos]

Thanks folks for your comments.




Cheers Georgios(kenntos)