It slides cylindrically, setting that way the thickness of the glass that should be placed above it. That has the option to set it in the range of 0 to 2 mm.
It requires a tube lens of 160 mm.
As you can see I`ve placed the glass thickness in the "0" position (that should adjust the lens to act like as it has no glass above it).
- If I`ll use the Raynox 150 DCR setup (which places the objective (almost) 160 mm away from the sensor what would be the outcome (in terms of magnification)?
- If I decide to use the Sigma LSA, what should be the distances of the setup?
- I intend to use the IT-200 too, so an equation, or something like it, would be very handy
Hoping not to be so much pain .
Have a nice weekend.